perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 36 (click to view)
Common Operations
English
Setting the dimmer level (DMR LEVEL)
This function allows you to set how much the displayed is to be dimmed. � The factory default setting is �3�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �DMR LEVEL�.
ADJ APPEARANCE
Making the LED blink when DCP is removed (BLINK LED)
You can make the LED on this unit blink when the DCP is removed. � The factory default setting is �OFF�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BLINK LED�.
ADJ APPEARANCE
DMR L E V E L
3
RTN
BL INK LED
OFF
RTN
4. Touch on the right of the display to set the dimmer level. � Select one of OFF (dimming OFF, bright), 1 (slightly dimmed) to 5 (dark). 5. Press the [ADJ] button to return to the original mode.
4. Touch on the right of the display to select �ON� or �OFF�. 5. Press the [ADJ] button to return to the original mode.
Adjusting the brightness of the display (BRIGHT)
You can adjust the brightness of the display to match the mounting angle of the unit. � The factory default setting is �5�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BRIGHT�.
ADJ APPEARANCE
Setting the beep for when buttons are operated (BEEP)
The short or long high-pitched tone you hear when a button is operated is called a �BEEP�. � The factory default setting is �ON�. 1. Press the [ADJ] button to set to the adjust mode. 2. Touch [APPEARANCE]. 3. Touch on the left of the display to select �BEEP�.
ADJ APPEARANCE
BEEP
OFF
RTN
BRIGHT
5
RTN
4. Touch on the right of the display to adjust the brightness. � This setting item can be adjusted within the range 1 to 12. Adjust this setting item while viewing how the appearance of the display changes. 5. Press the [ADJ] button to return to the original mode.
4. Touch on the right of the display to select �ON� or �OFF�. 5. Press the [ADJ] button to return to the original mode.
